TFS Quanta 250 3VIEW
Instrument contact:
- Location location_onHPM C 57.2
- Phone phone+41 44 633 44 24
- Fax print+41 44 633 13 36
- contactsvCard Download
ScopeM
Otto-Stern-Weg 3
8093
Zürich
Switzerland
Brief description:
The microscope is dedicated for operation with the Gatan 3View system: a microtome equipped with a diamond knife mounted inside the SEM chamber. This allows automated serial block-face imaging. Three dimensional data sets are obtained by sequentially sectioning and imaging the resulting block-face by SEM. Stacks with 5 nm imaging resolution, 5k x 5k pixels wide, and a section thickness between 30–200 nm can be acquired routinely. A special sample preparation is required for optimum results.
Camera / detectors:
- Gatan 3View + BSE
- ETD (SE) and LFD (SE low-Vac)
Software:
- Digital Micrograph, Gatan (data acquisition)
- Amira (FEI) or Imaris (Bitplane) are available for visualization and analysis
Key features:
- Gatan 3View
- High Voltage: 0.2–30 kV
- Emitter: Schottky Type
- Vacuum modes:
- High vacuum
- Low vacuum (<1.3 mbar)
- ESEM (<40 mbar)
Booking rules
The general ScopeM booking rules apply.
Exceptions for this system:
- currently no limitation for bookings to allow stack acquisition
- however, bookings exceeding 48 h should be coordinated with the instrument responsible